LG DLGX8388WM Owner's Manual (English) - Page 16

HOW TO USE SPECIAL FUNCTIONS The option buttons also activate special functions, including DAMP DRY BEEP, CHILD LOCK, and LANGUAGE. Press and hold the option button marked with the special function for 3 seconds to activate. * DAMP DRY BEEP With this option, the dryer will beep when the load is approximately 80% dry. This allows you to remove faster-drying lightweight items or items that you would like to iron or hang while still slightly damp. Press and hold the ANTI BACTERIAL button for 3 seconds to activate or deactivate DAMP DRY BEEP. * CHILD LOCK Use this option to prevent EASY IRON * CHILD LOCK unwanted use of the dryer or to keep cycle settings from being changed while the dryer is operating. Press and hold the EASY IRON button for 3 seconds to activate or deactivate the CHILD LOCK function. The lock icon will be shown in the display, and all controls are disabled. OTHER FUNCTIONS * RACK DRY Use RACK DRY with items, such as wool sweaters, silk, and lingerie, that should dry flat. RACK DRY can also be used with items that should not be tumbled dry, such as gym shoes or stuffed To Install the Drying Rack 1 With the dryer door open, slide the rack into the dryer drum. * LANGUAGE This option allows you to change the language shown in the display. Once BEEPER set, the selected language will stay set even after the power is turned off. The display language options are English, French, and Spanish; English is the default language. To change the language: 1 Press the ON/OFF button to turn on the dryer. 2 Press and hold the BEEPER button for 3 seconds, until the following screen appears in the display. 3 Press the BEEPER button repeatedly to cycle through "FRANÇAIS" (French), "ESPAÑOL" (Spanish), and then back to English. animals. Press and hold the WRINKLE CARE button for 3 seconds to activate or deactivate the RACK DRY function. NOTE: NEVER use the rack with a tumble dry cycle. 2 Make sure it is seated evenly on the edge of the inner door rim and resting flat on the inside of the dryer. NOTE: Be sure to remove the drying rack after using the RACK DRY cycle. 30 HOW TO USE OTHER FUNCTIONS Custom Program If you have a special combination of settings that you use frequently, you can save these settings as a CUSTOM PROGRAM. * To Save a Custom Program: 1 Turn on the dryer and turn the cycle selector knob to select the desired cycle. 2 Use the cycle setting buttons to adjust the settings for that cycle. 3 Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. 4 Press and hold the CUSTOM PROGRAM button for 3 seconds. STEAM FUNCTIONS To Fill the Steam Feeder 1 Pull out the drawer. Drawer NOTE: You may only save one custom program at a time. Pressing and holding the CUSTOM PROGRAM button will overwrite any previously saved custom program. To Recall a Custom Program: 1 Turn on the dryer. 2 Press the CUSTOM PROGRAM button. 3 Press the START/PAUSE button to start the cycle. 3 Fill the steam feeder to MAX with water. Water Steam Feeder ONLY MAX 2 Lift out the steam feeder. 4 Place the steam feeder in the drawer, then push in the drawer until it clicks into place. IMPORTANT NOTES ABOUT STEAM CYCLES ERROR WATER SUPPLY ERROR. FILL STEAM FEEDER WITH FILTERED WATER. SEE OWNERS MANUAL. ADD WATER SENSOR DRY 20% DRYING 0:35 EST. TIME REMAINING NORMAL MEDIUM _ _ _ LOW Before using a Steam Cycle, the steam feeder must be filled with water up to the MAX line. If not, an Error message or ADD WATER will be displayed. Make sure that the steam feeder is filled with water and the drawer is completely closed. Turn the dryer off then restart the Steam Cycle. • Only use water. Do not fill the steam feeder with foreign substances, rinse agents, or detergents. • Before moving the dryer, make sure the steam feeder is empty. • Do not use distilled water; the water level sensor in the steam generator will not work. wWARNING: • Do not fill the steam feeder with liquids such as gasoline, dry-cleaning solvents, or other flammable or explosive substances. They give off vapors that could explode. • Do not fill the steam feeder with hot water (over 86° F / 30° C). • Do not drink water from the steam feeder. 31