LG DN191H Owners Manual - Page 9
Setting up the Player, DVD Player Connections - hdmi
UPC - 074441000127
View all LG DN191H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installation and Setup Introduction Installation and Setup Operation Setting up the Player The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc. DVD Player Connections Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information. Component Video - Connect the COMPONENT VIDEO OUT/(480p/720p/1080i) jacks on the DVD Player to the corresponding in jacks on the TV using an Y Pb Pr cable (C). Progressive Scan • If your television is a high-definition or "digital ready" television, you may take advantage of the unit's progressive scan output for the highest video resolution possible. • Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack and S-VIDEO OUT jack). • The 720p and 480p resolutions are the progressive scan applied resolution. Resolution setting 1. Before you set the resolution, this unit must be in stop mode. Press STOP to stop playback. 2. Press RESOLUTION once. The current resolution setting will be appears in the display window. 3. Press RESOLUTION repeatedly to change the resolution you want. The available resolution according to the connections are as shown below. Video and Audio Connections to Your TV Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system. S-Video: Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in jack on the TV using the S-Video cable (S) Video - Connect the VIDEO OUT jack on the DVD player to the video in jack on the TV using the video cable (V) Audio - Connect the left and right AUDIO OUT jacks of the DVD Player to the audio left and right IN jacks on the TV (A) using the audio cables. Do not connect the DVD Player's AUDIO OUT jack to the phone in jack (record deck) of your audio system. OUTPUT CONNECTION HDMI VIDEO OUT COMPONENT VIDEO OUT VIDEO OUT S-VIDEO Available Resolution 1920 x 1080i 1280 x 720p 720 x 480p 1920 x 1080i 1280 x 720p 720 x 480p 720 x 480i 720 x 480i 720 x 480i Notes: • For Video and S-Video connections, resolution must be set to 480i or 480p by pressing RESOLUTION button, however Video OUT and S-Video OUT is always at 480i standard resolution. • If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read TV's owner's manual then set the resolution that your TV can accept. • For 720p and 1080i resolution on the component video out, only non-copy protected discs can be played back.If the disc is copy protected, it will be displayed at the 480p resolution without HDMI cable connection. With HDMI cable connection, the picture may not be displayed properly. 9 Reference