LG DU-27FB32C Installation Guide - Page 50
LT2000 QuickSet Clone Programmer - master remote
View all LG DU-27FB32C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
LT2000 QuickSet Clone Programmer Use the LT2000 QuickSet II "Clone" Programmer to copy the setup from a "master" TV then quickly transfer the setup to duplicate TVs; must be the same model number as the master TV. THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION XX THE TV IS VERSION XX THE SW IS REVISION XX CLONE CLOCK = XX:XX TV CLOCK = XX:XX -PRESS ANY KEY TO CONTINUE. -DISCONNECT CLONE WHEN DONE. Learn Master TV Setup Typical MPI Connections Teach Other TV the Setup Typical MPI Connections Antenna RF Coxial Wire (75 ohm) Typical TV Back Antenna Digital Cable Antenna Matrix Out Component Video Input Pr Pb R Audio L M.P.I. M.P.I. Y Video In R Audio In L S-Video In R Audio In L TV Back Panel (Expanded View) Connect cable to TV MPI Jack and follow on screen instructions Status Indicator MPI • green • red Color Reset battery ok battery low Blink pattern • slow power on no communications • heartbeat power on communications ok Antenna RF Coxial Wire (75 ohm) Typical TV Back Antenna Digital Cable Antenna Matrix Out Component Video Input Pr Pb R Audio L M.P.I. M.P.I. Y Video In R Audio In L S-Video In R Audio In L TV Back Panel (Expanded View) Connect cable to TV MPI Jack and follow on screen instructions Status Indicator MPI • green • red Color Reset battery ok battery low Blink pattern • slow power on no communications • heartbeat power on communications ok ® QuickSet II Programmer LT2000 ZENITH ELECTRONICS CORPORATION, GLENVIEW, ILLINOIS, USA LT2000 Clone Programmer ® QuickSet II Programmer LT2000 ZENITH ELECTRONICS CORPORATION, GLENVIEW, ILLINOIS, USA LT2000 Clone Programmer The optional QuickSet II Clone Programmer (LT2000) allows custom setup and programming information to be quickly copied from a master TV into multiple identical television sets. Once learned from the master, setup data is retained in the LT2000 for future use. When using the LT2000, cloning operations will go easier if the TV set is connected to a good quality signal and operating with a stable picture displayed. To operate the LT2000, use the indicated keys on the HP602, LP702 or MBR3447 LG remotes, or the front panel keys on the TV receiver. Notes: Use only one MPI port for cloning. Do not run Auto Program while cloning. Page 50