LG DVT723 Installation Guide - Page 11

SYSTEM SETUP Connections (Continued) Basic TV Connections • Make one of the following connections, depending on the capabilities of your existing equipment. Audio/Video connection 1 Connect the DVD/VCR VIDEO OUT jack on the unit to the video in jack on the TV using the supplied video cable (V). 2 Connect the Left and Right DVD/VCR AUDIO OUT jacks on the unit to the audio left/right in jacks on the TV (A) using the supplied audio cables. otes • If you use this connection, set the TV's source selector to VIDEO. Optional TV Connections ote DVD playback can also be done using the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT connection options below. The VCR ONLY output through the DVD/VCR OUT (A, V) jack. (See left) Component Video connection 1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the unit to the corresponding in jacks on the TV using Y Pb Pr cables (C). 2 Connect the Left and Right AUDIO OUT jacks of the unit to the audio left/right in jacks on the TV (A) using the supplied audio cables. Progressive Scan connection • If your television is a high-definition or "digital ready" television, you may take advantage of the unit's progressive scan output for the highest video resolution possible. • If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the unit. 1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the unit to the corresponding in jacks on the TV using Y Pb Pr cable (C). 2 Connect the Left and Right AUDIO OUT jacks of the unit to the audio left/right in jacks on the TV (A) using the supplied audio cables. otes • Set the Progressive Scan to "On" on the DVD setup menu for progressive signal, see page 19. • Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack). Rear of TV AUDIO INPUT VIDEO INPUT COMPONENT/PROGRESSIVE SCAN VIDEO INPUT L R L Pr Pb Y A V C Rear of the unit 11