LG DVT723 Installation Guide - Page 6

Before Use (Continued) Precautions Handling the unit Shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center outward. Setting up the unit The picture and sound of a nearby TV, VCR or radio may be distorted during playback. In this case, position the unit away from the TV, VCR or radio, or turn off the unit after removing the disc. Keeping unit surfaces clean Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They will leave marks on the surface. Cleaning the unit Cleaning the cabinet Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. To obtain a clear picture The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. Notes on Discs Disc handling Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Yes No Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. Disc Symbols About the symbol display may appear on the TV screen during operation. This icon means the function explained in this owner's manual is not available on that specific DVD video disc. About the disc symbols on manual pages A section whose title has one of the following symbols are applicable only to those discs represented by the symbol. DVD DVD Video discs. CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. Setting the Output Source You must select one of your output sources (DVD or VCR) to view on the TV screen. • If you want to view DVD deck output source: Press CD/DVD on the remote or DVD/VCR on the front panel until READING indicator in the display window lights and output source of DVD deck is viewed on the TV screen. • If you want to view VCR deck output source: Press VCR on the remote or DVD/VCR on the front panel until VCR indicator in the display window lights and output source of VCR deck is viewed on the TV screen. Storing discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature increase inside the car. 6 otes • If you insert a disc while the unit is in the VCR mode, the unit will switch to DVD mode automatically. • If you insert a cassette tape without prevention tab while the unit is in the DVD mode, the unit will switch to VCR mode automatically.