LG DX630 Owners Manual - Page 26

Function Presentation timer Function 1. Press the TIMER button of remote control. 2. Press the , button to select Time alarm or Time keeper item. Time alarm Time Keeper MENU Exit Move Off Off Select 3. Press the , button to select the desired preset time. 4. The timer starts to operate if you select specific time. G Time alarm function : If you select a specific time, it is displayed in minute units. After 1 minute, the remaining time is displayed at the bottom right of the screen, and then disappears after 5 seconds. When the remaining time is displayed, other OSD windows are closed. When the set time is reached, '0 minute' flickers 10 times at 1 second intervals, and then disappears. G Time keeper function : If you select a specific time, it continues to be displayed in minute(') and second(") units. Even though other OSD windows appear, the remaining time is displayed again after the windows are closed. When the set time is reached. 0' 00" flickers 10 times at 1 second intervals, and then disappears. 5. If the set time disappears because of the use of other menus, press the Timer button on a remote to display the set time again. G The Time alarm function and the Time keeper function cannot be used at the same time. G The Time alarm function can be set from 5 to 60 minutes at 5 minute intervals (Off, 5, 10, 15, 20 55, 60 minutes). G The Time keeper function can be set from 1 to 10 minutes at 1 minute intervals, and from 10 to 60 minutes al 5 minute intervals (Off, 1, 2, 3, 4 8, 9, 10, 15, 20, 25 55, 60 minutes). G You can use this function through the MENU button. G Press the EXIT button to exit the menu screen. Using Keystone Function * Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape. * Only use the Keystone function when you can't get the best angle of projection. 1. Press the KEYSTONE button of remote control. Keystone 0 Exit 2. Press the , button to adjust the screen condition as you want. G Keystone can be adjusted from -20 to 20. G You can use the Keystone function on the menu screen by pressing the MENU button, or by pressing the Keystone + and Keystone - buttons on the control panel. G Press the MENU button twice or the EXIT button to exit the menu screen. Adjust 26