LG G4010 User Guide - Page 10
Disconnecting the Charger, Installing the SIM Card
View all LG G4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Getting Started Disconnecting the Charger When charging is finished, disconnect the adapter from the power outlet and from the phone by pressing on the gray tabs on both sides of the connector while pulling the connector out. Notice G The battery delivered with your phone has to be fully charged before using it. G Do not remove the battery or the SIM card while charging. G If your phone is powered on while charging, you'll see the bars in the battery indicator icon cycle. When the battery is fully charged, the bars in the battery indicator icon will flash on and off G If your phone is powered off, the display will show the charging status. "Charging" or "Full" will be displayed. Charging FUll If the battery fails to charge completely: G After turning the phone on and off, please attempt to recharge the battery. G After detaching and reattaching the battery, please attempt to recharge the battery. 20 Getting Started Installing the SIM Card When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription details (PIN, optional services available and so on). Locate the SIM card socket in the back of the phone. Follow the steps below to install the SIM card. 1. Remove the battery if attached. 2. Slide the SIM card into the SIM card holder so that the holder locks the card in position. SIM Notice When you need to remove the SIM card, slide it towards the top of the phone and take it out of the holder. SIM Notice G Before installing always make sure that the phone is switched off and remove the battery. G The metal contact of the SIM card can be easily damaged by scratches. Pay special attention to the SIM card while handling and installing. Follow the instructions supplied with the SIM card. 21