LG H27F39DT Owner's Manual - Page 29

Installer's Menus Use the Installer Menu to set up or change operational settings See descriptions of the Installer items on the following pages... Accessing the Installer's Menu Installer's menu items can be accessed by using the optional LP702 installer's remote control. Just press and hold MENU (about 8 seconds) until the display changes, then press 9, 8, 7, 6, then ENTER. To exit the Installer's Menu, press ENTER again. Any changes you make will be stored in nonvolatile memory. The Installer's menu opens with item 0-I, INST. SEQ. Use the SELECT key to sequence through the available menu items. Or, access an item directly by entering the line number, then pressing MENU. For example, to access the Sleep Timer option which is on line 15-I, press 15, then MENU. To change a setting use the Left/Right ADJ keys. Using the Installer's Menu Items 0-I - 86-I are immediately accessible only upon entering the Installer's Menu. Their numbers, descriptions, ranges, factory default settings, and a place for listing any changes made on-site are given below and on the following pages. A Factory Menu that is intended for qualified service technicians only, is not shown. Normally Factory menu items do not require adjustment. Installer Menu Items 0-I through 25-I 0IMCRMI039A 01.66 01 0-I INST. SEQ. 0 SN: XXXX-XXXXXXXX UPN: XXX-XXX-XXX-XXX XX/XX/XX TE = 10110000 Typical Installer Menu XX-F Menu Items (Not shown here) are servicetype adjustments and only qualified technicians having specialized test equipment should access them. Menu Item 0-I. 1-I. 2-I. 3-I. 4-I. 5-I. 6-I. 7-I. 8-I. 9-I. 10-I. 11-I. 12-I. 13-I. 14-I. 15-I. 16-I. 17-I. 18-I. 19-I. 20-I. 21-I. 22-I. 23-I. 24-I. 25-I. Function INSTALLER. SEQ POWER MANAGE AC ON BAND/AFC STRT CHANNEL CHAN LOCK GHOST CH START VOLUME MIN VOLUME MAX VOLUME MUTE DISABLE KEY DEFEAT IR BANKS EN. SCAN MODE STRT CH IN SM SLEEP TIMER EN. TIMER ALARM NOT USED NOT USED FEATURE LEVEL V-CHIP MAX BLK HRS CAPTION LOCK TEXT MODE NOT USED Value Range 0 - 3 0 - 7 0 / 1 0 - 7 0 - 255 0 / 1 0 / 1 0 - 63, 255 0 - 63 0 - 63 0 / 1 0 / 1 0 / 1 0 / 1 0 / 1 0 / 1 0 / 1 0 / 1 Default Value 0 0 0 0 255 0 0 255 0 63 0 0 0 0 0 1 1 1 Brief Description of Function and Comments Leave default set 0. Sets number of hours of no activity before auto shutoff. Set to 1 to enable auto turn on at power up. Tuning band, see detailed descriptions. Channel at turn on (255 tune to last channel before turn off). When set to 1, cannot tune from current channel. Set to 1 to enable Ghost Channel display. Volume level at TV turn-on (Set 255 to retain last volume level). Minimum volume setting. Maximum volume setting. Set to 1 to disable mute function. Set to 1 to disable Menu, Select, and Adj keys on front panel. Set to 1: enables TV to respond to IR codes to change Channel Bank directly. Puts On-Off in Ch Up/Down sequence. Set to 1 to put TV on/off below start channel number. Set to 1 to enable Sleep Timer. Set to 1 to enable Timer. Set to 1 to enable Alarm. 0 / 1 0 / 1 0 - 99 0 / 1 0 / 1 1 Zen 1 1 12 0 1 Leave default set 1 (1 Zen 1). Set to 1 to enable V-Chip Select number of Parental Control blocking hours. Set to 1 to retain Caption setting at turn off. Set to 1 to add Text option to closed caption menu. PAGE 29