LG H27F39DT Owner's Manual - Page 33

Installer Menus Installer Menu Items 14-I through 40-I: Detailed Descriptions Scan mode 0 Characteristics Channel up/down keys change channels only. 1 Channel down below the lowest channel (or channel up higher than the highest) and TV turns off. 14-I. STRT CH IN SM When set to 1, installs TV on/off event below the start channel at TV turn on. Set to 1 to restore previous caption On/Off state after TV turns off. When set to 0, captions are always off, when TV is initially turned on. 24-I. TEXT MODE Determines whether TEXT 1, TEXT 2, TEXT 3, or TEXT 4 decoding is enabled when TEXT is turned on (either from the Setup Menu or directly with CC on the remote). TIP: Set Text Mode to 1 only if text is offered in your video system. 15-I. SLEEP TIMER When set to 1, the Sleep Timer feature may be used (but no message is displayed prior to turn-off). When set to 0, the Sleep Timer is not available. 16-I. EN. TIMER Set to 1, Timer functions are available to user. Set to 0 to disable Timer functions. (Clock must be set in order to use Timers.) 17-I. ALARM Gives you the option of making the alarm function available to the user. Set to 1, Alarm function is available to user. Set to 0 to disable the Alarm function. Note: Clock must be set in order to set the Alarm. 25-I. NOT USED 26-I. NOT USED 27-I. NOT USED 28-I. CH. OVERRIDE (Channel Override) When set to 1, the user can select channels with either Channel up/down or by direct number keypad entry. When set to 0, only those channels that are entered for scanning may be selected by keypad entry. Note: If set to 0, Auto Program is locked; (as shown on Setup menu) channel search is not available. 29-I. NOT USED 18-I. NOT USED 30-I. NOT USED 19-I. NOT USED 31-I. NOT USED 20-I. FEATURE LEVEL Default set to ZEN 1 for Zenith IR remote control operation. Set O, P LBL for Zenith Private Label IR remote control operation. Warning: Do not set to "0" or remote will not control TV. Note: Installer should leave Item 20-I set to 1. 32-I. NOT USED 33-I. NOT USED 34-I. NOT USED 35-I. NOT USED 21-I. V-CHIP Set to 1 to activate V-Chip (Parental Control); have it available to user to filter or control or restrict programming content. Set to 0 to turn V-Chip feature off, not available to user; no programming restrictions can be set. 22-I. MAX BLK HRS Set to 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default is 12 blocking hours. 23-I. CAPTION LOCK 36-I. NOT USED 37-I. NOT USED 38-I. NOT USED 39-I. NOT USED 40-I. AUTO CAMPORT Set to 1 to automatically switch to Camport when equipment is connected to front Video input. Set to 0 to disable front Video automatic source selection. PAGE 33