LG HBLG1003R Owners Manual - Page 12
LG HBLG1003R Manual
View all LG HBLG1003R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation Proper clearance enhances the cooling! efficiency of the unit and prevents heat radiation of the condenser. 1. If a storm window presents interference, fasten a 2" wide wood strip to the inner window sill across the full width of the sill. The wood strip should be thick enough to raise the height ,of the window sill so that the unit can b,e installed without interference by the storm window frame. 2.. See Figure. B. The top of the wood strip should be, approximately 3/4" higher than the storm window frame (Storm Window Rame) or wood strip (Outdoors) to help ,condensation to drain properly t,o the outside. 3. Install a second wood strip (approximately 6" long by 11/2" wide and same thickness as first strip) in the center of the sill flush against the back off the inner sill. This will raise the L bracket as shown Figure. B. 4. If the distance between Storm Window Frame and Wood Strip Mounted on Top of Inner Sill is more than 1", two of wood strips are not necessary. Inner Si_l indoors Figure, A Figure, B 12 Room Air Conditioner