LG HMC036KDT1 Service Manual - Page 59

Disassembly, parts, Indoor, Service, Manual

Get LG HMC036KDT1 PDF manuals and user guides View all LG HMC036KDT1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

2. To remove the Control Box. • Remove securing screws. • Pull the control box out from the chassis carefully. 3. To remove the Discharge Grille. • Pull the discharge grille out from the chassis carefully. Disassembly of the parts (Indoor unit) Hook ( 4 ) 0 Hook (4) 0 Screw Screw 4. To remove the Evaporator. • Remove screws securing the evaporator and the holder eva. • Unhook the tab on the right inside of the chassis at the same time, slightly pull the evaporator toward you until the tab is clear of the slot. 5. To remove the Cross-Flow Fan • Loosen the screw securing the cross-flow fan to the fan motor (do not remove). • Lift up the right side of the cross-flow fan and the fan motor, separate the fan motor from the cross-flow fan. Screw • Remove the left end of the cross-flow fan from the self-aligning bearing. Bearing 0 Fan motor Screw Cross-flow fan Service Manual 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Disassembly
of
the
parts
(Indoor
unit)
2.
To
remove
the
Control
Box.
•
Remove
securing
screws.
•
Pull
the
control
box
out
from
the
chassis
care-
fully.
3.
To
remove
the
Discharge
Grille.
•
Pull
the
discharge
grille
out
from
the
chassis
carefully.
4.
To
remove
the
Evaporator.
•
Remove
screws
securing
the
evaporator
and
the
holder
eva.
•
Unhook
the
tab
on
the
right
inside
of
the
chas-
sis
at
the
same
time,
slightly
pull
the
evapora-
tor
toward
you
until
the
tab
is
clear
of
the
slot.
5.
To
remove
the
Cross
-Flow
Fan
•
Loosen
the
screw
securing
the
cross
-flow
fan
to
the
fan
motor
(do
not
remove).
•
Lift
up
the
right
side
of
the
cross
-flow
fan
and
the
fan
motor,
separate
the
fan
motor
from
the
cross
-flow
fan.
•
Remove
the
left
end
of
the
cross
-flow
fan
from
the
self
-aligning
bearing.
Hook
(
4
)
0
0
Hook
(4)
Screw
Screw
Screw
0
Screw
Fan
motor
Cross
-flow
fan
Bearing
Service
Manual
59