LG HS200G Owners Manual - Page 23

Installing Instructions (HS200/HS200G Only) - hs200 projector

Page 23 highlights

Function Installing Instructions (HS200/HS200G Only) • This product is for domestic use. • If used in a medical institution, it may cause an error for medical equipments.Please do not use in a medical establishment. • Please maintain the distance between the projector and FM receiver within 3m. • The sound from FM receiver may not come out in the desired quality if the distance is more than 3m. • Please adjust the location of FM receiver and its antenna and install them to where it shows a good condition of receiving reception. • According to the installed location and environment, the receiving distance may become shorter and the sound may be interrupted due to: - If an obstacle is located near the projector and FM receiver. - If an obstacle passes near by the projector and FM receiver. - If the FM receiver is installed Left, Right, or diagonal line of projector - If the Projector or the FM receiver is located inside of a rack made of metal. - If other FM transmitter equipment is working near at the same frequency. - If there is a radio broadcast on air at the same frequency. - If working in the dusty, humid, or high temperature environment. What do I do if the FM receiving signal is not good? (HS200/HS200G Only) • Please adjust the antenna of FM receiver or move the location of FM receiver. • If there is no Audio signal or low reception, within 55 seconds the FM Wireless Audio function will shut down automatically. • Please check the incoming audio signal. • Please check if the power of projector or FM receiver is on. • Please check if there is any obstacle between the projector and FM receiver. • Please check if there is any metallic hardware or electronic product near by. • Please check if there is any radio broadcasting channel using the same frequency. • If there is a radio broadcasting channel using the same frequency, please change to a different frequency on the projector. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

Function
24
This product is for domestic use.
If used in a medical institution, it may cause an error for medical equipments.Please do not use in a medical
establishment.
Please maintain the distance between the projector and FM receiver within 3m.
The sound from FM receiver may not come out in the desired quality if the distance is more than 3m.
Please adjust the location of FM receiver and its antenna and install them to where it shows a good condition
of receiving reception.
According to the installed location and environment, the receiving distance may become shorter and the
sound may be interrupted due to:
- If an obstacle is located near the projector and FM receiver.
- If an obstacle passes near by the projector and FM receiver.
- If the FM receiver is installed Left, Right, or diagonal line of projector
- If the Projector or the FM receiver is located inside of a rack made of metal.
- If other FM transmitter equipment is working near at the same frequency.
- If there is a radio broadcast on air at the same frequency.
- If working in the dusty, humid, or high temperature environment.
Installing Instructions
(HS200/HS200G Only)
Please adjust the antenna of FM receiver or move the location of FM receiver.
If there is no Audio signal or low reception, within 55 seconds the FM Wireless Audio function will shut down
automatically.
Please check the incoming audio signal.
Please check if the power of projector or FM receiver is on.
Please check if there is any obstacle between the projector and FM receiver.
Please check if there is any metallic hardware or electronic product near by.
Please check if there is any radio broadcasting channel using the same frequency.
If there is a radio broadcasting channel using the same frequency, please change to a different frequency on
the projector.
What do I do if the FM receiving signal is not good?
(HS200/HS200G Only)