LG HX301 Owner's Manual - Page 20

Function SCREEN Menu Options To Change PJT Mode * This function turns the projected image upside down or flips horizontal. 1 . Press the Q.MENU button on the remote control. 2 . Press the ＜, ＞ buttons to move to PJT Mode. 3 . Press the ∧, ∨ button to select a desired item. • Select Rear when projecting from the back of the transparent screen purchased separately. • Select Ceiling when installing the product on the ceiling. • When PJT Mode is Rear/Ceiling, the left/right of the speaker changes automatically. • You can use this function through the MENU button. • Press the BACK button to exit the menu screen. PJT Mode Front Using Aspect Ratio Function Press the RATIO button to select a desired screen size. ꔗ 4:3 ꔃ ꔗ Just Scan ꔃ ꔗ Set By Program ꔃ ꔗ Cinema Zoom1 ꔃ ꔗ Zoom ꔃ ꔗ 16:9 ꔃ • Some options may not be available depending on input signals. • You can use this function through the MENU button. • Press the BACK button to exit the menu screen. Aspect Ratio 16:9 Using Keystone Function * Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape. * Only use the Keystone function when you can't get the best angle of projection. 1 . Press the KEY.Sꔌ, KEY.Sꔍ button of remote control. 2 . Press the KEY.Sꔌ, KEY.Sꔍ button to adjust the screen condition as you want. •Keystone 0 ꔗ - • Keystone can be adjusted from -40 to 40. • You can use this function through the MENU button. • Press the BACK button to exit the menu screen. +ꔃ ꔉOK 20