LG HX301 Owner's Manual - Page 28

Function Screen Capture Function 1 . Press the MENU button. Then, move to OPTION with the buttons and press the ◉OK button. 2 . Press the ∧, ∨ buttons to move to Screen Capture and press the ◉OK button. • It can only be elected when there is an input signal. • It takes up to 2 minutes when capturing screen. • Press the BACK button to exit the menu screen. OPTION Menu Language Blank Image Screen Capture LED Mode Auto Power Demo Mode Initial Setting : English : Blue ꔂMove ꔉOK : Normal : Off : Off : Home Use To adjust the brightness of the screen 1 . Press the Q.MENU button on the remote control. 2 . Press the ＜, ＞ buttons to move to LED Mode. 3 . Move to a desired item with the ＜, ＞ buttons. • LED Mode changes into Dimming mode automatically at specific temperatures (37°C or higher). Dimming mode gets about 90% brightness of original led mode. • LED Mode changes into Dimming mode automatically if use a optical battery. • You can use this function through the MENU button. • Press the BACK button to exit the menu screen. LED Mode Normal To make the power of the projector turn on automatically when power is in 1 . Press the MENU button. Then, move to OPTION with the buttons and press the ◉OK button. 2 . Press the ∧, ∨ buttons to move to Auto Power and press the ◉OK button. 3 . Press the ∧, ∨ buttons to move to On and press the ◉OK button. OPTION Menu Language Blank Image Screen Capture LED Mode Auto Power Demo Mode Initial Setting : English : Blue ꔂMove ꔉOK : Normal : Off : Off : Home Use • On: Connecting DC cable to the projector turns on the projector. • Off: Connecting DC cable to the projector makes the projector in standby state. • Press the BACK button to exit the menu screen. 28