LG HX350 Owner's Manual - Page 22

Operating the Projector SCREEN Menu Options To Change PJT Mode * This function turns the projected image upside down or flips horizontal. 1. Press the Q.MENU button on the remote control. 2. Press the ꔗ, ꔃ buttons to move PJT Mode. 3. Press the ꔌ, ꔍ button to select a desired item. • Select Rear when projecting from the back of the transparent screen purchased separately. • Select Ceiling when installing the product on the ceiling. • When PJT Mode is Rear/Front Ceiling, the left/right of the speaker changes automatically. • You can also use this function through the MENU button. • Press the BACK button to exit the menu screen. PJT Mode CH Front Using Aspect Ratio Function Press the RATIO button to select a desired screen size. 4:3 Just Scan Set By Program Cinema Zoom1 Zoom 16:9 • Some options may not be available depending on input signals. • You can also use this function through the MENU button. • Press the BACK button to exit the menu screen. Aspect Ratio 16:9 CH Using Keystone Function * Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape. * Only use the Keystone function when you can't get the best angle by moving the projector. 1. Press the KEY.Sꔌ, KEY.Sꔍ button of remote control. 2. Press the KEY.Sꔌ, KEY.Sꔍ button to adjust the screen condition as you want. •Keystone 0 ꔗ - • Keystone can be adjusted from -40 to 40. • You can also use this function through the MENU button. • Press the BACK button to exit the menu screen. +ꔃ ꔉOK 22