LG HX350 Owner's Manual - Page 23
STILL, RGB Config., SCREEN
View all LG HX350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Operating the Projector Auto Configure Function * This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization of the image. * Auto Tracking function works in RGB PC input only. Press the AUTO button of the remote control. • If you execute screen adjustment for a video from PC graphic signal, optimal state may not be found. Execute the Auto Config. function for a still image. • You can also use this function through the MENU button. Auto config. RGB Config. Function 1. Press the MENU button. Then, move to SCREEN with the buttons and press the ◉OK button. 2. Press the ꔌ, ꔍ buttons to move RGB Config. and press the ◉OK button. 3. Move to a desired item with the ꔌ, ꔍ buttons and then press the ꔃ button. 4. Press the button to adjust the screen condition as you want and then press the ◉OK button. RGB Config. ꔂMove ꕉ Prev. Resolution ꔃ ꔐ1024 x 768 Auto Config. 1280 x 768 1360 x 768 Position Size Phase Reset • Resolution can be chosen between 768 resolution (1024x768/1280x768/1360x768, 60Hz). • Press the BACK button to exit the menu screen. Using the Still Function 1. Press the STILL button on the remote control. * You can freeze the moving image. < Moving Image > < Still Image > 2. To exit Still, press any button. * The STILL function will release automatically after approximately 10 minutes. 23