LG LBC22520ST Owner's Manual - Page 11

REFRIGERATOR INSTALLATION 2. Installing Refrigerator Door • Remove the cover (1) using a flat head screwdriver (this requires a little force), loosen the two screws (2) and place on the opposite side. • Place the hinge (3) on the opposite side and install the four screws (4 & 5). • Insert the pin (6) in the hinge (3). • Remove the cover (7) and install it on the right side. • Place the door and line up with the pin holes (8), making sure that both parts are aligned. • Place the top hinge (9) and insert the three screws (10). • Position the cover of the hinge over this (11). • Check that the door has been installed correctly. 11 10 9 7 4 8 2 5 3 1 6 HOW TO REMOVE THE DOOR HANDLES NOTE: The appearance of the handle may appear different. 3. Removing the Refrigerator Handle • Loosen the fixation screws (1) with a 3/32 inch Allen Wrench and remove the handle (2). • Remove the assembly screws (3) with a 1/4 inch Allen Wrench. • Carefully remove the plug buttons from the door (4). The buttons can be unscrewed using your fingers, turning counter-clockwise. Continue turning until the screw is loose and falls out. • Install the buttons (4) on the left side. 4. Replacing the Refrigerator Handle • Rotate handle upside down (1). • Insert the assembly screws on the opposite side of the door (2). • Hold the handle in place with the holes lined up with the screw holes (3) and tighten the screws (4) in place with the 3/32 inch Allen Wrench. 3 4 Assembly Screws Fixation Screws Allen 2 Wrench 1 4 1 4 2 3 10