LG LBC22520SW Owner's Manual - Page 17

After Completing Installation

Page 17 highlights

REFRIGERATOR INSTALLATION • Take the freezer door and align the pivot holes up with • Install the hinge (3), assemble the three screws (4) the bolt holes and assemble them (18). and replace the hinge cover (5). 5 4 18 3 • Insert the pin into the hinge (19). (Ensure that it is between the pivot and the freezer door). • Replace the washer over the pin (20). Pin 19 Washer • Check to make sure that both doors close correctly. AFTER COMPLETING INSTALLATION 20 Make sure that the corners of the door seals are not folded over. To ensure a good seal, apply a little silicon grease on them. Corners 6. Installing the Refrigerator Door • Insert the door over the axis of the pin (1). 1 • Remove the cover (2) and place on the opposite side. 2 Corners 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

16
Take the freezer door and align the pivot holes up with
the bolt holes and assemble them (18).
Insert the pin into the hinge (19). (Ensure that it is
between the pivot and the freezer door).
Replace the washer over the pin (20).
Pin
Washer
6. Installing the Refrigerator Door
Insert the door over the axis of the pin (1).
Remove the cover (2) and place on the opposite side.
Install the hinge (3), assemble the three screws (4)
and replace the hinge cover (5).
Check to make sure that both doors close correctly.
AFTER COMPLETING INSTALLATION
Make sure that the corners of the door seals are not
folded over. To ensure a good seal, apply a little silicon
grease on them.
Corners
Corners
18
19
20
1
2
3
5
4
REFRIGERATOR INSTALLATION