LG LBC22520SW Owner's Manual - Page 18
Closing And Aligning The Doors
View all LG LBC22520SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
REFRIGERATOR INSTALLATION CLOSING AND ALIGNING THE DOORS Closing the Doors Your refrigerator has two front leveling screws, one on the right and one on the left. If your refrigerator seems unstable or if you would like the doors to close more easily, simply adjust the inclination of the refrigerator by following the instructions below: 1. Plug the refrigerator into a 3 prong grounded outlet. Move the refrigerator into its final position. 2.Remove the base grille (Refer to the section on "Installation of Base Grille"). Aligning the Doors If the spacing between the doors is uneven, follow the instructions below to align them: 1. Pry off the top hinge cover. 2.Loosen the screws from the top hinge using a 10 mm socket or wrench. 3. Have someone help you hold the door in place or place a spacer between the doors while tightening the top hinge screws. 3. Use a flat head screwdriver to adjust the leveling screws, turning clockwise to raise the side of the refrigerator and counter-clockwise to lower it. It may take several turns to adjust it to the inclination you would like. 4.Replace the top hinge cover. NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws. This will make it easier to adjust the screws. 4.Open both doors again and check to make sure that they close easily. If not, slightly tilt the refrigerator further back by turning both leveling screws clockwise. It may take several more turns. Make sure that you turn both leveling screws the same amount. 5. Ensure that the refrigerator is even by using a level. 6.Replace the base grille. 17