LG LBN10551SW User Guide - Page 16

REHINGING OF DOORS The refrigerator is designed so that the doors can be opened right or left depending on the layout of your kitchen. CAUTION! 1. Prior to hinging the door to the opposite side, first of all unload the refrigerator from foodstuffs and remove all unsecured accessories (shelves and drawers) from it. 2. To tighten and loose bolts, use a socket wrench or a box wrench for 10 mm. 3. Do not lay the refrigerator onto the floor. 4. Take care to exclude dropping of the door in the process of disassembly or assembly. Remove the plastic bushing 6 from the door of the refrigeration compartment А . Unscrew the screw 10 located above the door of the refrigerator and move the door stop 9 to the opposite side. Tighten the screw 10 . Move the plastic bushings 6 and 14 (only for models with an internal display) to the opposite side. 14 7 5 A 1. Unscrew the screw 2 of the upper hinge cover 1 to remove the hinge cover 1 and disconnect the connection cable 5 (only for models with an external display). Unscrew the bolts 3 fixing the upper hinge 4 and carefully remove the door from the middle hinge 18 . Remove the blank 8 . 1 2 3 4 For external display 5 8 A 9 10 6 3. (Only for models with an external display). Using a flat screwdriver, push and separate the caps 12 from the front panel 11 and unscrew the screws 13 , remove the panel 11 , move the cable 15 to the opposite side. After installation of the panel 11 into place, tighten the screws 13 and close their heads with the caps 12 . 15 8 2.Remove the upper door cover 7 (only for models with an external display), pull out the cable 5 and install it to the hole on the opposite side of the door. Install the upper door cover 7 into place. 11 13 12 4. Unscrew the bolts 17 of the middle hinge, remove the middle hinge and raise the door of the freezing compartment B to remove the door. Remove the blank 19 and install it instead of the removed middle hinge 18 . 15