LG LCG3691ST Owner's Manual - Page 13

CARE AND CLEANING OF THE COOKTOP STAINLESS STEEL SURFACES Do not use a steel wool pad; it will scratch the surface. To clean the stainless steel surface, use warm soapy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface. To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free customer service number: 1-800-243-0000 or visit our website at: us.lgservice.com CONTROL KNOBS It's a good idea to wipe the control panel after each use of the cooktop. Clean or rinse the control panel by using a damp cloth. Use mild soap and water or a 50/50 solution of vinegar and water. Use clean water for rinsing. Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleaners on the control knobs - they can cause damage to the finish of the knobs. Do not try to bend knobs by pulling them up or down or by hanging a towel or other such loads. This can damage the gas valve shaft. The control knobs may be removed for easier cleaning. Make sure the knobs are in the "OFF" positions and pull them straight off the stems for cleaning. To reinstall the knobs, make Surface burner knob sure the knob has the "OFF" position centered at the top and slide the knob directly onto the stem. NOTE: To prevent mis-operation during cleaning the control knobs, Unplug your cooktop. 13