LG LDF7932ST Owner's Manual (English) - Page 17

Adding Rinse Aid To The Dispenser

Page 17 highlights

OPERATING INSTRUCTIONS ADDING RINSE AID TO THE DISPENSER The use of rinse aid products is recommended to prevent spots on dishes from water droplets remaining after the completion of the wash cycle, and to enhance the performance of the dry cycle. NOTE: Only use liquid rinse aid in this dishwasher. 1 Rotate the round cap counterclockwise to remove it. English 2 Add a liquid rinse aid to the maximum fill level (max. 4.8 oz [145 ml]). RINSE AID DISPENSER ADJUSTMENT The rinse aid dispenser is factory-set to level 3, Rinse Aid Indicator Eye which should provide the best performance under most conditions. Setting the rinse aid control too low will contribute to spotting and streaking of dishes Adjustment Lever and poor drying performance. Setting the control too high can cause foaming, which will cause poor wash performance. To adjust the rinse aid dispenser setting, remove the cap and adjust the rinse aid lever to the desired setting. 3 Replace the cap and turn clockwise to lock. Rinse aid will be dispensed automatically during the final rinse cycle. REFILLING THE RINSE AID The capacity of the rinse aid dispenser is 4.8 oz (145 ml). How often the dispenser will need to be refilled depends on how often dishes are washed and the rinse aid setting used. If the rinse aid level is low, the Rinse Aid light on the control panel will illuminate. NOTE : The dispenser also has a round Rinse Aid Indicator Eye that is dark when the dispenser is full and light when it is empty. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

17
English
OPERATING INSTRUCTIONS
ADDING RINSE AID TO THE DISPENSER
The use of rinse aid products is recommended to
prevent spots on dishes from water droplets
remaining after the completion of the wash cycle,
and to enhance the performance of the dry cycle.
NOTE:
Only use liquid rinse aid in this
dishwasher.
1
Rotate the round cap counterclockwise to
remove it.
2
Add a liquid rinse aid to the maximum fill
level (max. 4.8 oz [145 ml]).
3
Replace the cap and turn clockwise to lock.
Rinse aid will be dispensed automatically
during the final rinse cycle.
RINSE AID DISPENSER ADJUSTMENT
The rinse aid dispenser is factory-set to level 3,
which should provide
the best performance
under most conditions.
Setting the rinse aid
control too low will
contribute to spotting
and streaking of dishes
and poor drying
performance. Setting
the control too high can cause foaming, which
will cause poor wash performance.
To adjust the rinse aid dispenser setting, remove
the cap and adjust the rinse aid lever to the
desired setting.
REFILLING THE RINSE AID
The capacity of the rinse aid dispenser is 4.8 oz
(145 ml). How often the dispenser will need to be
refilled depends on how often dishes are washed
and the rinse aid setting used.
If the rinse aid level is low, the Rinse Aid light on
the control panel will illuminate.
NOTE :
The dispenser also has a round Rinse Aid
Indicator Eye that is dark when the dispenser
is full and light when it is empty.
Rinse Aid Indicator Eye
Adjustment Lever