LG LDP7808BD Owners Manual - Page 40
Loading the Cutlery Rack (On Some Models), Removing the Snap-In Gliding Upper, Rack On Some Models
View all LG LDP7808BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
ENGLISH Removing the Snap-In Gliding Upper Rack (On Some Models) These instructions are for models with snap-in rack supports rather than wheeled rack supports. CAUTION ••The snap-in upper rack should only be removed for servicing. If you need to remove the rack, wear gloves and handle the screwdriver carefully to avoid personal injury or damage to the dishwasher. 1 Pull the upper rack out until it stops. Remove any contents from the rack. 2 To remove the front rack supports from the rails, push the front hooks open with a flat-blade screwdriver while pulling the front of the rack up to snap the front rack support out of the hooks. Repeat to snap the front support out on the opposite side. OPERATION 39 Loading the Cutlery Rack (On Some Models) The cutlery rack is best suited for flatware and most cooking or serving utensils. It can also fit small prep bowls and lids. The separators on the cutlery racks help keep flatware separated to avoid damage and improve cleaning. NOTE ••For best cleaning performance, place flatware in the silverware baskets. Heavily soiled utensils or items with baked on foods should be placed in the middle rack or spoon basket for best performance. Loading 10 Place Settings 3 To remove the back rack supports from the rails, hold a side rail with one hand, lift the front of the rack, and firmly push the rack back to snap the support out of the hooks in the rear. Repeat on the opposite side. CAUTION ••Do not place bowls in the center of the cutlery rack. The door may not close properly, resulting in leakage. 4 To replace the rack, place the back rack supports behind the rear hooks and pull the rack forward to snap the supports into the hooks. Then align the front rack supports with the front hooks and push the front of the rack down to snap the supports into the front hooks.