LG LFCC23596S Owners Manual - Page 43

Before Calling for Service, Cooling - review

Get LG LFCC23596S PDF manuals and user guides View all LG LFCC23596S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

TROUBLESHOOTING 43 ENGLISH Before Calling for Service Review this section before calling for service; doing so will save you both time and money. Cooling Problem Refrigerator and Freezer section are not cooling. Cooling system runs too much. Possible Cause Solutions A fuse in your home may be blown or the circuit breaker tripped. Or the appliance is connected to a GFCI (Ground Fault Circuit Interrupter) outlet, and the outlet's circuit breaker has tripped. ••Check the main electrical box and replace the fuse or reset the circuit breaker. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician. ••Reset the circuit breaker on the GFCI. If the problem persists, contact an electrician. The refrigerator control is set ••Turn the control ON. Refer to the Setting the Controls to OFF (some models). section for proper temperature settings. Refrigerator is set to Demo Mode. ••Demo Mode allows the lights and control display to work normally while disabling cooling, to save energy while the refrigerator is on the showroom floor. See the FAQs section of this manual for instructions on how to disable Demo Mode. Refrigerator is in the defrost cycle. ••During the defrost cycle, the temperature of each compartment may rise slightly. Wait 30 minutes and confirm the proper temperature has been restored once the defrost cycle has completed. Refrigerator was recently installed. ••It may take up to 24 hours for each compartment to reach the desired temperature. Refrigerator was recently relocated. ••If the refrigerator was stored for a long period of time or moved on its side, it is necessary for the refrigerator to stand upright for 24 hours before connecting it to power. Refrigerator is replacing an older model. ••Modern refrigerators require more operating time but use less energy due to more efficient technology. Refrigerator was recently ••The refrigerator will take up to 24 hours to cool plugged in or power restored. completely. The door is opened often or a large amount of food / hot food was added. ••Adding food and opening the door warms the refrigerator, requiring the compressor to run longer in order to cool the refrigerator back down. In order to conserve energy, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food is removed. (Refer to the Food Storage Guide.) Doors are not closed completely. ••Firmly push the doors shut. If they will not shut all the way, the "Doors will not close correctly or pop open" section. Refrigerator is installed in a hot location. ••The compressor will run longer under warm conditions. At normal room temperatures (70 °F) expect your compressor to run about 40 % to 80 % of the time. Under warmer conditions, expect it to run even more often. The refrigerator should not be operated above 110 °F. Condenser / back cover is clogged. ••Use a vacuum cleaner with an attachment to clean the condenser cover and vents. Do not remove the panel covering the condenser coil area.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
43
TROUBLESHOOTING
ENGLISH
Before Calling for Service
Review this section before calling for service; doing so will save you both time and money.
Cooling
Problem
Possible Cause
Solutions
Refrigerator and
Freezer section are
not cooling.
A fuse in your home may be
blown or the circuit breaker
tripped. Or the appliance is
connected to a GFCI (Ground
Fault Circuit Interrupter) outlet,
and the outlet’s circuit breaker
has tripped.
•
Check the main electrical box and replace the fuse or
reset the circuit breaker. Do not increase fuse capacity.
If the problem is a circuit overload, have it corrected by
a qualified electrician.
•
Reset the circuit breaker on the GFCI. If the problem
persists, contact an electrician.
The refrigerator control is set
to OFF (some models).
•
Turn the control ON. Refer to the Setting the Controls
section for proper temperature settings.
Refrigerator is set to Demo
Mode.
•
Demo Mode allows the lights and control display to
work normally while disabling cooling, to save energy
while the refrigerator is on the showroom floor. See the
FAQs
section of this manual for instructions on how to
disable Demo Mode.
Refrigerator is in the defrost
cycle.
•
During the defrost cycle, the temperature of each
compartment may rise slightly. Wait 30 minutes and
confirm the proper temperature has been restored once
the defrost cycle has completed.
Refrigerator was recently
installed.
•
It may take up to 24 hours for each compartment to
reach the desired temperature.
Refrigerator was recently
relocated.
•
If the refrigerator was stored for a long period of time
or moved on its side, it is necessary for the refrigerator
to stand upright for 24 hours before connecting it to
power.
Cooling system
runs too much.
Refrigerator is replacing an
older model.
•
Modern refrigerators require more operating time but
use less energy due to more efficient technology.
Refrigerator was recently
plugged in or power restored.
•
The refrigerator will take up to 24 hours to cool
completely.
The door is opened often or a
large amount of food / hot food
was added.
•
Adding food and opening the door warms the
refrigerator, requiring the compressor to run longer in
order to cool the refrigerator back down. In order to
conserve energy, try to get everything you need out of
the refrigerator at once, keep food organized so it is
easy to find, and close the door as soon as the food is
removed. (Refer to the Food Storage Guide.)
Doors are not closed
completely.
•
Firmly push the doors shut. If they will not shut all the
way, the "Doors will not close correctly or pop open"
section.
Refrigerator is installed in a
hot location.
•
The compressor will run longer under warm conditions.
At normal room temperatures (70 °F) expect your
compressor to run about 40 % to 80 % of the time.
Under warmer conditions, expect it to run even more
often. The refrigerator should not be operated above
110 °F.
Condenser / back cover is
clogged.
•
Use a vacuum cleaner with an attachment to clean the
condenser cover and vents. Do not remove the panel
covering the condenser coil area.