LG LFD25860TT User Guide - Page 16
Ensuring, Proper, Se_ing, Controls - water filter
View all LG LFD25860TT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ENSURING PROPER AIR CIRCULATION In order to ensure proper temperatures, air must flow between the refrigerator and freezer sections.. As shown in the illustration below, air enters at top of the freezer and circulates down. From the bottom of the freezer, air is forced up to the top of the refrigerator. Air enters refrigerator through the top vent, then circulates and exists at the bottom, where it returns to the freezer.. SE_ING THE CONTROLS Your refrigerator has a control pad on the dispenser that lets you regulate the temperature in the freezer and refrigerator compartments. Initially set the REFRIGERATOR CONTROL at 37°F (3°0) and the FREEZER CONTROL at 0°F (-18°C). Leave it at this setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as desired. • Multi-Flow means powerful and effective cooling operation. This is especially noticeable when new food is placed in the refrigerator compartment. • If water or foreign substances enter the cool air vent while cleaning, efficiency will be lowered. In addition, if gasket is damaged, efficiency' may be lowered because of escaping cool air. Do not bl_k any of cool air vents with foed packages. If the vents are blocked, airflow will be interrupted and temperature and moisture problems may occur. IMPORTANT: Because air circulates between _th sections, any edors formed in one section will transfer to the other. You must thoroughly clean _th sections to eliminate odors. To prevent odor transfer and drying out of foed, wrap or cover foods tightly. (See the Food Storage Guide section for details.) Refrigerator Temp Control: 33°F to 46°F (O°C to 8°C) The lower the number setting, the colder the refrigerator compartment will become. Freezer Temp Control: _°F to 8°F (-21°C to -13°C) When the setting is at a lower number, the freezer compartment becomes colder. The refrigerator compartment becomes wa_er because less cold air flows into the refrigerator. NOTE: If you want to change '_Fto °C or the reverse, press and hold FREEZER key and REFRIGERATOR key simultaneously for 5 seconds or more. NOTE: If you want to off display, press and hold ICE PLUS key and FREEZER key over 5 seconds at the same time. NOTE: Touch display once to activate, then touch again to change the settings or activate a function, if 10 seconds has passed since the display has been touched, it will be necessary to touch "once '_again to reactivate _' This is to prevent accidental display setting changes. ICE PLUS : Press the ICE PLUS button and the LED will turn on. This function will remain activated for 24 hours and increase the cooling speed of the freezer and the amount of ice produced. Dispenser L_k : Press and hold the LOCK button for 3 seconds to lock the dispenser. When it is locked, the dispenser will not operate. To unlock, press and hold the LOCK button for 3 seconds. • Filter Reset : It displays in months the number of months left to exchange the filter from the moment power is connected to the refrigerator, if you have changed the filter after 6 months of use, press and hold the FILTER button 3 seconds or more and the filter display will be initialized with a buzzing sound. NOTE: The average life of the filter is 6 months. A WARNING: If a door is _, the dispenser does n_ w_k. 16