LG LFD25860TT User Guide - Page 28

Personal Injury Hazard Avoid contact with the moving parts of the eiector mechanism, or with the heating element that releases the cubes.. DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in. OPERATION INSTRUCTIONS A newly-installed refrigerator may take 12 to 24 hours to begin making ice, NOTE: If the cube size is smaller or larger than you expected, you can regulate the size with the cube size button. Eve_ time you press the cube size button, the indicator moves up one light. The higher the light position, the larger the cubes will be. Pressing at the highest position returns the indicator to the lowest position. WHEN YOU SHOULD SET THE ICEMAKER POWER SWITCH TO O (OFF) ,, When the water supply will be shut off for several hours. • When the ice storage bin is removed for more than a minute or two. ,, When the refrigerator will not be usod for several days. Icemaker Cube Size Indicator Light Cube Size Select Button _Automatic Shut off Arm Power Switch NORMAL SOUNDS YOU MAY HEAR The icemaker water valve will buzz as the icemaker fills with water. If the power switch is in the I (on) position, it will buzz even if it has not yet been h_ked up to water. To stop the buzzing, move the power switch to 0 (off). NOTE: Keeping the power switch in the I (on) position before the water line is connected can damage the icemaken You will hear the sound of cubes dropping into the bin and water running in the pipes as the icemaker refills. PREPARING FOR VACATION The icemaker will produce eight cubes per cycl_ approximately 1C_-130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions. If the refrigerator is used before the water connection is made to the icemaker, set the power switch to 0 (o_. When the refrigerator has been connected to the water supply, set the power switch to I (on). The icemaker will fill with water when it c_ls to freezing. A newly-installod refrigerator may take 12 to 24 hours to begin making ice cubes.. Throw away the first few batches of ice to allow the water line to clear. Set the icemaker power switch to 0 (off) and shut off the water supply to the refrigerator. If the ambient temperature will drop below freezing, have a qualifiod servicer drain the water supply system to prevent serious proper#j damage due to flooding from ruptured water lines or connections. Be sure nothing interferes with the sweep of the feeler arm. When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. It is normal for several cubes to be stuck together. If ice is net used frequently, old ice cubes will b_ome cloudy, taste stale, and shrink. 28