LG LFX25960SW User Guide - Page 25

Crisper, Cover, Lattice, On Inner, Surface

Page 25 highlights

To remove crisper door flap 1. Raise the door flap as high as it will open. 2. Press the plastic hinge toward the center of the door flap with your finger. 3. Lift the door out of its place. 4. To replace, reverse the above procedure. 1. Remove crisper cover (as illustrated above). 2. Hold the glass cover and turn the crisper cover over. 3. For each lattice hold lattice and pull sides of the cover outward to remove lattice. To remove the glass 1. Lift up the glass after inserting a finger into a hole under the crisper cover. 2. Pull the glass up and out. To replace lattice on inner surface 1. For each lattice insert middle tab in 1 (closed to glass cover)and pull sides of the cover to insert lattice. CRISPER COVER WITH LATTICE ON INNER SURFACE To remove the lattice on inner surface DAIRY BIN 1. To remove the dairy bin, simply lift it and pull straight out. 2.To replace the dairy bin, slide it in above the desired location and push down until it stops. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

To
remove crisper
door
flap
1.
Raise the door flap as high as it
will
open.
2. Press the plastic
hinge toward the center of the door
flap with your finger.
3. Lift the door out of its place.
4. To replace, reverse the above procedure.
To remove
the glass
1. Lift up the glass after inserting
a finger into a hole
under the crisper cover.
2. Pull the glass up and out.
1. Remove
crisper cover (as illustrated above).
2. Hold the glass cover and turn the crisper cover over.
3. For each lattice hold lattice and pull sides of the cover
outward to remove lattice.
To replace
lattice
on
inner
surface
1. For each lattice insert middle
tab in 1 (closed to glass
cover)and
pull sides of the cover to insert lattice.
CRISPER
COVER
WITH
LATTICE
ON INNER
SURFACE
To remove
the lattice
on
inner
surface
DAIRY
BIN
1. To
remove
the
dairy
bin, simply
lift it and pull straight
out.
2.To
replace
the
dairy bin,
slide it in above the desired
location and push down until it stops.
25