LG LHB996 Owner's Manual - Page 21

Resolution Setting, Antenna connection

Page 21 highlights

Connecting 21 Resolution Setting Antenna connection The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUTPUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME (n). Connect the supplied antenna for listening to the radio. 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use W/S to select [DISPLAY] option then press D to move to the second level. 2 4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. Connecting 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. ,,Note yy If your TV does not accept the resolution you have set on the player, you can set resolution to 480p as follows: 1. Press B to open the disc tray. 2 Press Z (STOP) for more than 5 seconds. yy Since several factors affect the resolution of video output, see "Video Output Resolution" on page 69. Rear of the unit ,,Note yy To prevent noise pickup. keep the AM Loop antenna away from the unit and other components. yy After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

Connecting
21
Connecting
2
Resolution Setting
The player provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUTPUT jacks.
You can change the resolution using [Setup] menu.
1.
Press HOME
(
n
).
2.
Use
A/D
to select the [Setup] and press ENTER
(
b
). The [Setup] menu appears.
3.
Use
W/S
to select [DISPLAY] option then
press
D
to move to the second level.
4.
Use
W/S
to select the [Resolution] option
then press ENTER (
b
) to move to the third level.
5. Use
W/S
to select the desired resolution then
press ENTER (
b
) to confirm your selection.
y
If your TV does not accept the resolution
you have set on the player, you can set
resolution to 480p as follows:
1. Press
B
to open the disc tray.
2
Press
Z
(STOP) for more than 5 seconds.
y
Since several factors affect the resolution of
video output, see “Video Output Resolution”
on page 69.
,
Note
Antenna connection
Connect the supplied antenna for listening to the
radio.
Rear of the unit
y
To prevent noise pickup. keep the AM Loop
antenna away from the unit and other
components.
y
After connecting the FM wire antenna, keep
it as horizontal as possible. Be sure to fully
extend the FM wire antenna.
,
Note