LG LRFDC2406S Owners Manual - Page 23
Leveling and Door, Alignment
View all LG LRFDC2406S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Insert the end of the copper tubing into the connection as far as possible. While holding the tubing, tighten the fitting. INSTALLATION 23 it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator. NOTE A flare nut wrench works best, but an open-end wrench will suffice. Do not over-tighten. ENGLISH a Tubing Clamp b ¼ in. Tubing c ¼ in. Compression Nut d Ferrule (sleeve) e Refrigerator Connection 10 Turn the water on at the shutoff valve. Tighten any connections that leak. CAUTION Check to see if leaks occur at the water line connections. 2 Open both doors and check to make sure that they close easily. If the doors do not close easily, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and be sure to turn both leveling legs the same amount. Door Alignment (Standard Door Model) Both the left and right refrigerator doors have an adjustable nut, located on the bottom hinge, to raise and lower them to align properly. If the space between the doors is uneven even after the door bins are filled, follow the instructions below to align the doors evenly: Use the wrench (included with the owner's manual) to turn the nut in the door hinge to adjust the height. Turn the nut to the right to raise the door or to the left to lower it. Leveling and Door Alignment Leveling The refrigerator has two front leveling legs. Adjust the legs to alter the tilt from front-to-back or sideto side. If the refrigerator seems unsteady, or the doors do not close easily, adjust the refrigerators tilt using the instructions below: 1 Turn the leveling leg to the left to raise that side of the refrigerator or to the right to lower