LG LRFDS3016D Owners Manual - Page 46
Replacing the Water Filter
View all LG LRFDS3016D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
46 MAINTENANCE CAUTION Do not install systems in areas where ambient temperatures may go above 110° F (43.3° C). Where a backflow prevention device is installed on a water system, a device for controlling pressure due to thermal expansion must be installed. Ensure all tubing and fittings are secure and free from leaks. Replacing the Water Filter Replace the water filter: - Approximately every six months. - When the Replace Filter h icon turns on. - When the water dispenser output decreases. To purchase a replacement water filter: - Visit your local dealer or distributor - Search using "water filter" on lg.com - Use replacement cartridge: LT1000P, LT1000PC, LT1000PCS or ADQ747935** 1 Remove the door bin. 2 Remove the disposable water filter. lines up with the arrow on the filter head. Swing the filter back into the compartment. 4 Replace the door bin. 5 After changing the filter, press and hold the Water Filter button for three seconds to reset the indicator light. 6 After the water filter is replaced, dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminants from the system. NOTE Do not dispense the entire 2.5 gallon amount continuously. Press and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. CAUTION LG strongly recommends that you use LGauthorized water filters to prevent water quality issues, water leakage and appliance malfunction. For further assistance, call: 1-800-243-0000 (USA) 1-888-542-2623 (Canada) NOTE Replacing the water filter causes a small amount of water (around 1 oz. or 25 cc) to drain. Wrap a cloth around the front end of the water filter cover to collect any leaking water. Hold the water filter upright, once it is removed, to prevent any remaining water from spilling out of the water filter. 3 Replace with a new water filter. Insert the new filter into the filter head and rotate it clockwise until the arrow on the new filter