LG LRSC21935TT User Guide - Page 17

Cautions, Filter condition, filter replacement, cycle display, function - water filter for

Page 17 highlights

Operation 6 Filter condition (filter replacement cycle) display function After 6 months, the following sentence and will appear on the filter condition part of the LED. "Press for 3 seconds after replacing filter" After 6 months have passed, and if the filter has been replaced or you want to reset the filter condition display, press the filter replacement button for more than 3 seconds and it will reset to the initial Power On state. Cautions Throw away the ice (about 20 pieces) and water (about 7 glasses) first made after refrigerator installation. The first ice and water may include particles or odor from the feed water pipe or feed water box. This is necessary in case that the refrigerator has not been used for a long time. Keep children away from the dispenser. Children may push switch incorrectly bad or damage lamps. Be careful that food is not block the ice passage. If foods are placed at the entrance of ice passage, ice may not be dispensed. The ice passage may also be covered with ice powder if splinter ice is used only. This time, remove the ice powder accumulated. Never store beverage cans or other foods in ice storage bin for the purpose of rapid cooling. Such actions may damage the automatic ice maker. Never use thin crystal glass or crockery to collect ice. Such glasses or containers may be broken. Put ice first into a glass before filling water or other beverages. Water may be splashed if ice is added to existing liquid in a glass. Never touch a hand or other tools on ice outlet. Touch may cause a part breakage or hand injury. Never remove the ice maker cover. Sometimes level the surface so that the ice storage bin is fully filled with ice. Ice is piled up just near the ice maker. So, such status may be considered, by the ice maker, that the ice storage bin is fully filled and ice making operation may stop. If discolored ice is dispensed, immediately contact service center, stopping use. Never use too narrow or deep glass. Ice may be jammed in ice passage and, thus, the refrigerator may be failed. Keep the glass at a proper distance from ice outlet. A glass too close to the outlet may hinder ice from coming out. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

17
Throw away the ice (about 20 pieces) and water (about 7 glasses) first made
after
refrigerator installation.
The first ice and water may include particles or odor from the feed water pipe or
feed
water box. This is necessary in case that the refrigerator has not been used for a long
time.
Keep children away from the dispenser.
Children may push switch incorrectly bad or damage lamps.
Be careful that food is not block the ice
passage.
If foods are placed at the entrance of ice
passage, ice may not be dispensed. The ice
passage may also be covered with ice
powder if
splinter ice is used only. This time,
remove the ice powder
accumulated.
Never store beverage cans or other
foods in ice storage bin for the purpose
of rapid cooling.
Such actions may damage the automatic ice maker.
Never use thin crystal glass or crockery to collect ice.
Such glasses or containers may be broken.
Put ice first into a glass before filling water or other beverages.
Water may be splashed if ice is added to existing liquid in a glass.
Never touch a hand or other tools on ice outlet.
Touch may cause a part breakage or hand injury.
Never remove the ice maker cover.
Sometimes level the surface so that the ice storage bin is fully filled with ice.
Ice is piled up just near the ice maker. So, such status may be considered, by the ice
maker, that the ice storage bin is fully filled and ice making operation may stop.
If discolored ice is dispensed, immediately contact service center, stopping use.
Never use too narrow or deep glass.
Ice may be jammed in ice passage and, thus, the refrigerator may be failed.
Keep the glass at a proper distance from ice outlet.
A glass too close to the outlet may hinder ice from coming out.
Cautions
Operation
±
After 6 months, the following sentence and
will appear on the filter condition
part of the LED. "Press for 3 seconds after replacing filter"
±
After 6 months have passed, and if the filter has been replaced or you want to reset
the filter condition display, press the filter replacement button for more than 3
seconds and it will reset to the initial Power On state.
6 Filter condition
(filter replacement
cycle) display
function