LG LRSC21935TT User Guide - Page 23
How to dismantle parts - filter
View all LG LRSC21935TT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Care and maintenance How to dismantle parts NOTE • Dismantling is done in the reverse sequence of assembly. Be sure to unplug the power plug before dismantling and assembly. Never apply severe force to dismantle parts. Parts may be damaged. Freezer compartment lamp Separate the lamp by pulling it out (➂) while slightly striking (➀) and rotating (➁) the lamp cover. Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and can be purchased at a service center. 1 2 3 Dispenser lamp Seperate the lamp by pulling it out, and then remove the lamp. Max. 15 W bulb for refrigerator is used and can be purchased at a service center. EXPRESS/JET FRZ DISPENSER FREEZER REFRIGERATER FILTER/LIGHT LOCK Freezer compartment shelf To remove a shelf, lift the left part of the shelf a bit, push it to the direction ( ), lift the right part to the diretion ( ), and take it out. 1 2 Door rack and Lift the door rack holding both sides ( ) and support pull it out to ( ) direction. Ice storage bin Hold the ice storage bin as shown in the right figure and pull it out ( ) while slightly lifting it ( ). It is recommended not to dismantle the ice storage bin unless it is necessary. Be sure to use both hands when removing the ice storage bin, so as not to drop it on the floor. If the ice storage bin does not fit well, slightly rotate the rotating device. After dispenser is used The water collector has no self-drainage function. So it should be cleaned regularly. Remove the cover by pressing the left side of water collector cover and dry it with a cloth. Press the point marked as shown in the figure to the right to remove the water collector cover. 2 1 23