LG LRSC26912SW User Guide - Page 24

How to Dismantle Parts

Page 24 highlights

How to Dismantle Parts Freezer Compartment Lamp Separatethe lamp by pulling it out ® while slightlystriking(1)and rotating @the lamp cover. Turnthe bulbcounterclockwise,Max, 40 W bulb for refrigerator is used and can be purchased at a service center. Dispenser Lamp Seperate the lamp by pulling it out, and then remove the lamp. Max. 15 W bulb for refrigerator is used and can be purchased at a service center. Freezer Compartment Shelf To remove a shelf, lift the left part of the shelf a bit, push it to the direction Q, lilt the right part to the direction @, and take it out. Door Rack and Suppo_ Lift the door rack holding both sides Q and pull it out to @direction. Ice Storage Bin Lift the ice shelf as shown in the right figure O and pull it out @. Hold the ice storage bin as shown in the right figure and pull it out @while slightly lilting it ®. • It is recommended not to dismantle the ice storage bin unless it is necessary. • Use both hands to remove the ice bin to avoid dropping it. • Ir the ice bin does not slide into place easily, twist the drive device slightly. After Dispenser Is Used The water collector has no self-draining function. It should be cleaned regularly. Remove the cover by pulling the front side of water collector cover and dry it with a cloth. Drive Device

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

Freezer
Compartment
Lamp
Dispenser
Lamp
Freezer
Compartment
Shelf
Door
Rack and
Suppo_
Ice Storage
Bin
After
Dispenser
Is Used
How to Dismantle Parts
Separatethe lamp by pulling it out ® while
slightlystriking(1)and rotating @the lampcover.
Turnthe bulbcounterclockwise,Max, 40 W bulb
for refrigerator is used and can be purchased at
a service center.
Seperate the lamp by pulling it out, and then
remove the lamp. Max. 15 W bulb for
refrigerator is used and can be purchased at a
service center.
To remove a shelf, lift the left part of the shelf
a bit, push it to the direction Q, lilt the right part
to the direction @, and take it out.
Lift the door rack holding both sides Q and
pull it out to @direction.
Lift the ice shelf as shown in the right figure
O
and pull it out @.
Hold the ice storage bin as shown in the right
figure and pull it out @while slightly lilting it
®.
• It is recommended not to dismantle the ice
storage bin unless it is necessary.
• Use both hands to remove the ice bin to avoid
dropping it.
• Ir the ice bin does not slide into place easily,
twist the drive device slightly.
The water collector has no self-draining
function. It should be cleaned regularly.
Remove the cover by pulling the front side of
water collector cover and dry it with a cloth.
Drive
Device