LG LRSDS2706S Owners Manual - Page 21
Turning on the Power
View all LG LRSDS2706S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2 Use the wrench to adjust the height by turning the adjustment hinge pin to the right to raise the door or to the left to lower it. INSTALLATION 21 Start the Icemaker • If the water line is connected, turn icemakers on. - To turn icemakers on, refer to Control Panel in the Operation section. • The icemaker will not begin to operate until it reaches its operating temperature of 15 °F (-9 °C) or below. It will then begin operation automatically if the icemaker has been turned ON. ENGLISH 3 Use the wrench to fasten the keeper nut by turning it to the right. CAUTION • Do not overtighten the door adjustment screw. The hinge pin can be pulled out and the adjustable range of height is a maximum of 2 in. (5 cm). Turning on the Power • After installing, plug the refrigerator's power cord into a 3-prong grounded outlet and push the refrigerator into the final position. CAUTION • Connect to a rated power outlet. • Have a certified electrician check the wall outlet and wiring for proper grounding. • Do not damage or cut off the ground terminal of the power plug. Position the Refrigerator • Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall.