LG LRSES2706V Owners Manual - Page 16

16 INSTALLATION Adjusting the Height of the Door If the door of the appliance is not level, adjust the difference in the height of appliance door using the following method. 3 Fasten the keeper nut by turning it counterclockwise. NOTE • Because the hinge pin may fall out, do not adjust the height of the appliance door more than 5 mm. *Reference Keeper nut Adjustment hinge pin 1 Turn the keeper nut clockwise using the spanner. To tighten the nut If it is impossible to adjust the height of the appliance door through the above method, level the door according to the following guide. Connecting the Appliance After installing the appliance, connect the power plug into a socket outlet. NOTE • After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you put food into the appliance. If you add food before the appliance has cooled completely, your food may spoil. To loosen the nut 2 Adjust the difference in the height of the appliance door by rotating the adjustment hinge pin clockwise or counterclockwise with an 8 mm spanner. Down Up Moving the Appliance 1 Remove all food from inside the appliance. 2 Pull the power plug out, insert and fix it into the power plug hook at the rear or on top of the appliance. 3 Tape parts such as shelves and the door handle to prevent from falling off while moving the appliance. 4 Move the appliance with more than two people carefully. When transporting the appliance over a long distance, keep the appliance upright. 5 After installing the appliance, connect the power plug into a socket out to switch on the appliance.