LG LSC24971ST Owner's Manual - Page 13

Mount the freezer and refrigerator, compartment doors, Water supply installation

Page 13 highlights

Installation Pass the Pass the refrigerator laterally through the access refrigerator door as shown in the right figure. Max 5 4 3 2 1 Min 1 2 TFERMZP 3 4 5 TREEMFP Max Mount the freezer and refrigerator compartment doors Mount them in the reverse sequence of removal after they pass through the access door. Water supply installation Before installation Automatic icemaker operation needs water pressure of 21~121 psi (1.5~8.5 kgf/cm2) (That is, a paper cup (6 oz. or 180 cc) will be fully filled within 3 seconds.) If water pressure does not reach the rating 21 psi (1.5 kgf/cm2) or below, it is necessary to purchase a separate pressure pump for normal automatic icemaking and cool water feed. Keep the total length of the feed water pipe tube within 26 ft (8 m). Be careful for the tube to avoid being kinked. If the tube is 26 ft (8 m) or longer it may cause trouble in water feed. Install the water supply line where it will not be affected by heat. WARNING Connect to a potable water supply only. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

13
Installation
Pass the refrigerator laterally through the access
door as shown in the right figure.
Pass the
refrigerator
WARNING
Mount the freezer and refrigerator
compartment doors
Water supply installation
³
Automatic icemaker operation needs water pressure of 21~121 psi
(1.5~8.5 kgf/cm
2
) (That is, a paper cup (6 oz. or 180 cc) will be fully filled within
3 seconds.)
³
If water pressure does not reach the rating 21 psi (1.5 kgf/cm
2
) or below, it is
necessary to purchase a separate pressure pump for normal automatic icemaking
and cool water feed.
³
Keep the total length of the feed water pipe tube within 26 ft (8 m). Be careful for
the tube to avoid being kinked. If the tube is 26 ft (8 m) or longer it may cause
trouble in water feed.
³
Install the water supply line where it will not be affected by heat.
³
Connect to a potable water supply only.
Mount them in the reverse sequence of removal after they pass through the access
door.
Before
installation