LG LSC27921SB Owner's Manual - Page 13

USING YOUR REFRIGERATOR ENSURING PROPER AIR CIRCULATION CONTROL PANEL FEATURES In order to ensure proper temperatures, air MUST flow between the refrigerator and freezer sections. • Cool air enters the freezer through the vents located at the top of the compartment and exits through the vents located behind the freezer drawers. • Cool air from the freezer section enters the fresh food section through vents located at the top of the compartment. The air moves down throughout the compartment and exits through the vents located behind the crisper drawers. Press the button for the desire function to review and select other settings. LED DISPLAY The LED display shows the temperature settings, dispenser options, and the water filter door alarm, and status messages. ICE TYPE The ICE TYPE is used to select cube, ice or crushed ice. NOTE: Hold the glass or other container in place for a couple of seconds after dispensing ice or water to catch the last few cubes or drops. The dispenser is designed not operate while either refrigerator door is open. FREEZER Press the FREEZER button to adjust the temperature in the freezer compartment. REFRIGERATOR Press the REFRIGERATOR button to adjust the temperature in the refrigerator compartment. NOTE: The actual inner temperature • Do not block any of these vents with food packages. varies depending on the food status, If the vents are blocked, airflow will be interrupted and since the indicated temperature temperature and moisture problems may occur. setting is the target temperature an not the actual temperature within IMPORTANT: the refrigerator. Because air circulates between both sections, any odors formed in one section will transfer to the other. Initially set the REFRIGERATOR CONTROL at 37 °F You MUST thoroughly clean both sections to eliminate (3°C). Leave it at these settings for 24 hours (one day) odors. To prevent odor transfer and dried out food, wrap to stabilize. Then adjust the compartment temperature or cover foods tightly. (See the Food Storage Guide as ilustrates above. section for details.) NOTE: When press simultaneously the FREEZER NOTE: If you close the button and the REFRIGERATOR button for refrigerator door, you may see more than 5 seconds, the temperature display the freezer door open and will change from Fahrenheit to Celsius or vice close again due to pressure versa. from internal air flow. ICE PLUS Press this button once to activate the increased ice PRIOR TO USE making function. The ICE PLUS icon on the display panel will illuminate when activated. The Ice Plus 1. Clean your refrigerator thoroughly and wipe off dust function runs the freezer compartment at the coldest accumulated during shipping. settings for a 24 hour period to increase ice making. 2.Install accessories such as ice cube bin, drawers, Press the button again to cancel the Ice Plus function. shelves, etc., in their proper places. They are packed together to prevent possible damage during shipment. 3.Let your refrigerator run for at least 2 or 3 hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use. 14