LG LSC27921SB Owner's Manual - Page 14

USING YOUR REFRIGERATOR LIGHT/FILTER The LIGHT/FILTER button controls the lamp in the dispenser, resets the water filter replacement indicator when the filter has been replaced. The water filter needs replacement once wvery six months. Filter month indicator becomes "0" to let you know when replace filter. Press and hold the LIGHT/FILTER button for more than 3 seconds to reset the filter month indicator to six after the water filter has been replaced. ALARM/LOCK Press this button to control the door-open alarm. Press and hold the ALARM/LOCK button for 3 seconds to lock the dispenser and all the other control panel functions. Press and hold again for 3 seconds to unlock. The ALARM/LOCK button also controls the door alarm that sounds three times in 30 seconds intervals when a compartment door is left open for more than 60 seconds. The alarm stop sounding when the door is closed. Press the ALARM/LOCK button once to activate or deactivate the door alarm function. DISPLAY OFF MODE To activated Display Off Mode press and hold ICE PLUS and FREEZER key over 5 seconds until lights will turn on and after 20 seconds of inactivity the lights will turn off automatically. To exit Display Off Mode press and hold ICE PLUS and FREEZER key over 5 seconds until lights will tilt. Display Off Mode doesn not affect the temperature control settings of the unit. Ice type indicator Shows the type of ice, crushed or cube, or water that the dispenser will dispense. Freezer temperature control Shows the temperature in the freezer, Celsius or Fahrenheit. Refrigerator temperature Shows the temperature in the refrigerator, Celsius or Fahrenheit. Ice Plus When this button is on the screen will show this has been activated. Dispenser light When this button is in function on the light will show this has been activated. When the dispenser light is on the display will indicate this feature. Door alarm indicator This indicator shows that the door-open warning alarm is activated. Water filter status This light shows the filter's status. See the filter's configurations. Lock status This light shows the actual status of the control panel, in which the lock function is on. DIAGNOSIS FUNCTION (FAILURE DETECTION) Diagnosis function automatically detects failure during the normal use of refrigerator. If you refrigerator fails, do not turn off the power. Instead, contact a local Authorized service center or call our support line for assistance. Turning off the appliance will make it more difficult for the service technician to determine the problem. 15