LG LSGL5831F Owners Manual - Page 21
Optional Rear Filler, Installing the Rear Filler, Anti-Tip Device, Installing the Anti-Tip Device
![]() |
View all LG LSGL5831F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
6 Replace the knob. 7 Test the flame stability. • Test 1: Turn the knob from Hi to Lo quickly. If the flame goes out, increase the flame size and test again. • Test 2: With the burner on a Lo setting, open and close the oven door quickly. If the flame is extinguished by the air currents created by the door movement, increase the flame height and test again. 8 Repeat steps 1~7 for each surface burner. Optional Rear Filler Installing the Rear Filler If the counter does not bridge the opening at the rear wall, the rear filler kit which is provided with the slide in range will be needed. NOTE • If the countertop depth is greater than 25 3/8" there will be a gap between the filler kit and the back wall. • If the countertop depth is less than 24 3/4", the control panel will not sit flush with the countertop. 1 Using a screwdriver, remove the three screws holding the rear top plate in place. 2 Attach the rear top plate and filler assembly as shown, using three screws removed in step 1. a Rear filler INSTALLATION 21 Anti-Tip Device Installing the Anti-Tip Device Tip Hazard WARNING • A child or adult can tip the range and be killed. • Install the anti-tip device to the structure and/or the range. Verify the anti-tip device has been properly installed and engaged by following the guide on the anti-tip bracket template. • Engage the range to the anti-tip device by following the guide on the anti-tip bracket template. Ensure the anti-tip device is reengaged when the range is moved by following the guide on the anti-tip bracket template. • Re-engage the anti-tip device if the range is moved. Do not operate the range without the anti-tip device in place and engaged. • See installation instructions for details. • Failure to follow these instructions can result in death or serious burns to children or adults. • Range must be secured with an approved anti- tip device. • The range could be tipped by standing, sitting or leaning on an open door if the range or anti-tip device is not properly installed. • The use of this device does not preclude tipping of the range when not properly installed. • After installing the anti-tip device, verify that it is in place by carefully attempting to tilt the range forward. • This range has been designed to meet all recognized industry tip standards for all normal conditions. • The installation of the anti-tip device must meet all local codes for securing the appliance. Using the Anti-Tip Bracket Template • The anti-tip bracket is packaged with an installation template. The instructions include necessary information to complete the installation. Read and follow the range installation instruction sheet. ENGLISH
![](/manual_guide/products/lg-lsgl5831f-owners-manual-be28bdf/21.png)