LG LSXS26386S Owners Manual - Page 12

ENGLISH 12 INSTALLATION Ambient Temperature Install this appliance in an area where the temperature is between 55°F (13°C) and 110°F (43°C). If the temperature around the appliance is too low or high, cooling ability may be adversely affected. Measuring the Clearances Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. Allow at least 24 inches (61 cm) in front of the refrigerator to open the doors, and at least 2 inches (5.08 cm) between the back of the refrigerator and the wall. 24" (61 cm) Removing/Assembling the Refrigerator Door Handles NOTE When it is necessary to move the refrigerator through a narrow opening, removing the doors is the recommended procedure. If it is necessary to remove the handles, follow the directions below. The appearance of the handle may vary from what is shown in the illustrations Removing the Handles 1 Loosen the set screws with a 3/32 in. Allen wrench and remove the handle. 2 Loosen the mounting fasteners that connect to the refrigerator door and handle using a ¼ in. Allen wrench, remove the mounting fasteners. Mounting Fasteners Set Screw 2"(5.08 cm) Allen Wrench Assembling the Handles 1 Assemble the mounting fasteners at both ends of the handle using a ¼ in. Allen wrench. 2 Place the handle on the door by fitting the handle footprints over the mounting fasteners and tightening the set screws with a 3/32 in. Allen wrench. Mounting Fasteners