LG LTC19340SW Owner's Manual - Page 12
How To Reverse And Install The Refrigerator Doors - does the refrigerator have a reversable door
View all LG LTC19340SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
REFRIGERATOR INSTALLATION HOW TO REVERSE AND INSTALL THE REFRIGERATOR DOORS You may find it more convenient to have the doors converted from the left opening type (factory installed) to the right opening type. Directions refer to the right side as the side on your right as you face the unit. TOOLS YOU MIGHT NEED OR USE 10 mm 13/32 in 3/8 in Hex Socket Wrench Phillips Screwdriver No. 2 Flat Head Screwdriver WARNING ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off the power at the circuit breaker or fuse box. Remove food and any door rack from the refrigerator. Failure to do so could result in death or serious injury. Fig. 3 1. Reversing Freezer Door • Gently pry off the top hinge cover with a flat head screwdriver and remove it (See Fig. 1). Fig. 1 • Turn freezer door upside down on a non scratch surface and loosen the screw to remove door closer (stop) and hinge pin insert. (See Fig. 4). Fig. 4 Door Closer (Stop) • Using 10 mm or 13/32 inch socket wrench, remove the three bolts and lift off the top hinge (See Fig. 2). Set parts aside. Fig. 2 Top Hinge • Move the hinge bracket to the other side of the door (keeping the same orientation) and move the hinge pin insert into the hole on the left side of the bracket (See Fig. 5). Fig. 5 Hinge Pin Insert Hinge Bracket • Lift up door slightly and remove it (See Fig. 3). • Reverse door closer (stop) by flipping over (See Fig. 6), place on top of hinge bracket and tighten both down with the screw. 12