LG LTC22350AL Owners Manual - Page 13
Reversing and Reinstalling Refrigerator Door, Installation of Base, Grille
![]() |
UPC - 048231783002
View all LG LTC22350AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Fig. 6 REFRIGERATOR INSTALLATION • Loosen and remove the two bolts and the screw to remove the middle hinge bracket from refrigerator housing (See Figure 10). Set parts aside. Fig. 10 Middle Hinge Bracket • Pry off cover on top refrigerator on left side to uncover screw holes (See Figure 7). • Set freezer door and top hinge parts to the side and remove refrigerator door. Fig. 7 Cover (on top of refrigerator) • Remove the Base Grille (See "Installation of Base Grille"). • Remove the washer from the bottom hinge pin. Using a 1/4 inch socket wrench, loosen and remove the hinge pin from the bottom hinge (Fig 11). • Reattach the hinge pin to the opposite side of the hinge. (See figure 12). NOTE: This is easier to do while the hinge is still attached. Fig. 11 2. Reversing and Reinstalling Refrigerator Door • Using a 1/4 inch socket wrench, loosen and remove hinge pin from the middle hinge bracket. Remove the washer underneath the hinge and set aside (Figure 8). NOTE: At this point, the door will be loose, lift up door slightly and remove it (Figure 9). Fig. 8 Hinge Pin Fig. 12 Fig. 9 • Using 10 mm or 13/32 inch socket wrench with 2 inch extension, loosen the three bolts and remove the Bottom Hinge from right side of refrigerator housing (Figure 13). 13
![](/manual_guide/products/lg-ltc22350al-owners-manual-5862ae8/13.png)