LG LTC22350AL Owners Manual - Page 15

REFRIGERATOR INSTALLATION • With flat-head screwdriver, carefully pry off and remove the cover over the screw holes on the left side of refrigerator housing (Figure 20). Fig. 20 Fig. 23 Decorative Screw • Remove the outer lower Decorative Screw from housing at area between freezer and refrigerator doors (See Figure 21). (You will need this hole for the Middle Hinge Bracket). 3. Reattaching Freezer Door • Put freezer door down over the Hinge Pin on the Middle Hinge Pin Bracket (See Figure 24). Fig. 24 Fig. 21 Decorative Bolt • Following illustration, flip the Middle Hinge Bracket (Flange will now be on top) and position on left side of refrigerator and re-attach with two bolts and a Phillips screw (Figure 22). • Place refrigerator door down over pin on bottom hinge. (See Figure 22). • Place washer between refrigerator door and middle hinge and re-attach Hinge Pin to Hinge Bracket with 1/4 inch socket wrench. NOTE: Bracket has been flipped, but Hinge Pin stays in the same orientation with its hexagonal end facing upward. Fig. 22 Hinge Pin Flange • Place Upper Hinge's Pin in the top of freezer door and line up the Upper Hinge with holes in top of refrigerator. Use the three bolts to replace Hinge (Figure 25). Fig. 25 • Tighten bolts. Force-fit Top Hinge Cover over Top Hinge (See Figure 26). Fig. 26 Middle Hinge Bracket • Place Decorative Screw into outer hole on right side of housing (Figure 23). • Attach cover on the right side. Cover is force-fitted 15