LG LTC22350ST Owner's Manual (English) - Page 18

CARE AND CLEANING WARNING PLASTIC PARTS (covers and panels) Do not use paper towels, window sprays, abrasive cleansers or flammable fluids. These can scratch or damage the material. CONDENSER COILS Remove base grille. (See the base grille section ) Explosion Hazard Use non-flammable cleaner. Failure to do so can result in death, explosion or fire. Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to prevent odors. Wipe up spills immediately. Use a vacuum cleaner with an extended attachment to clean condenser coils. Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month. Replace base grille. LIGHT BULB REPLACEMENT GENERAL CLEANING TIPS Unplug refrigerator or disconnect power. Remove all removable parts, such as shelves, crispers, etc. Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Hand wash, rinse and dry all surfaces thoroughly. Plug in refrigerator or reconnect power. OUTSIDE Waxing external painted metal surfaces helps provide rust protection. Do not wax plastic parts. Wax painted metal surfaces at least twice a year using appliance wax (or auto paste wax). Apply wax with a clean, soft cloth. For products with a stainless steel exterior, use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth. INSIDE WALLS (allow freezer to warm up so cloth won't stick) To help remove odors, you can wash the inside of the refrigerator with a mixture of baking soda and warm water. Mix 2 tablespoons baking soda to 1 quart of water (26 g soda to 1 liter water.) Be sure the baking soda is completely dissolved so does it not scratch the surfaces of the refrigerator. DOOR LINERS AND GASKETS Do not use cleaning waxes, concentrated detergents, bleaches or cleaners containing petroleum on plastic parts. WARNING Electrical Shock Hazard Before replacing a burned-out light bulb, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. NOTE: Moving the control to the OFF position does not remove power to the light circuit. NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. To change the refrigerator light: 1. Unplug the power cord from the outlet. 2. Remove refrigerator shelves. 3. Release the hooks on both ends of the light shield and pull the shield down to remove it. 4. Turn the bulb counterclockwise and remove. 5. Replace a burned-out light bulb with a new bulb, turning it clockwise. 6. Replace the light shield pushing it up. 7. Replace the refrigerator shelves. 8. Plug the power cord to the oulet. 18