LG LW2217IVSM Owners Manual - Page 15

4 Before installing the front grille, fold out the vent control lever located to the left of the control panel, as shown below 5 Connect the wire harness before assembling the front grille. INSTALLATION 15 EN 8 After the air conditioner is installed, measure the curtain panel on each side and cut the adhesive-backed heatproof foam to fit each panel. The size of the panels may differ. Remove the backing from the heatproof foam and attach the foam to the curtain panels. Adhesive Backed W1 W2 W2 W H W1 6 Attach the front grille to the cabinet by inserting the tabs on the grille into the slots on the front top of the cabinet. Push the grille in until it snaps into place. H Heatproof Foam H NOTE ● Heatproof foam improves the cooling capability of the air conditioner. ● See the Electrical Data section for information on attaching the power cord to an electrical outlet. NOTE ● Guide the lever carefully through the grille as you push it in. 7 Open and remove the inlet grille from the product. Secure the front grille assembly with 1 type A screw through the bottom of the front grille Assemble the inlet grille to the front grille again. Screw (Type A) Inlet Grille