LG LW6019ER Owners Manual - Page 11

Unit Installation

Page 11 highlights

ENGLISH 3 Open the window and mark center line on the center of the inner sill. Inner Sill Center Line Room Side 4 Install the L bracket behind the inner window sill, with short side of bracket as shown. Use the 2 Type A screws provided. Inner Sill Outer Sill Center Line INSTALLATION 11 Unit Installation CAUTION ● During the following step, hold unit firmly until window sash is lowered to top channel behind side panel frames. Personal injury or property damage may result if unit falls from window. 1 Set the air conditioner in the window so that is centered. Place the air conditioner so that front edge of the bottom guide is against the back edge of the sill. Bring the window down so that the front edge of the upper guide is in front of the window. Make sure that air conditioner is level or tilting slightly to the outside. Window Frame Upper Guide Seal About ¼" Bottom Guide L Bracket NOTE ● The bracket helps to hold unit securely in place. Be sure to place bracket edge flush against back of inner sill. L Bracket 2 Extend the guide panels to fill the window opening using 4 Type B screws to secure them. 3 Cut the foam strip to the window width. Stuff the foam strip between the glass and the window to prevent air and insects from getting into the room. Fasten the L bracket using a Type A screw. L Bracket Screw (Type A) Screws (Type B) Foam Strip CAUTION ● To prevent broken glass or damage to windows, on vinyl or other similarly constructed windows, attach the window locking beacket to the window side jamb with one Type A screw.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

ENGLISH
11
INSTALLATION
Unit Installation
1
Set the air conditioner in the window so that
is centered. Place the air conditioner so that
front edge of the bottom guide is against the
back edge of the sill.
Bring the window down so that the front edge
of the upper guide is in front of the window.
Make sure that air conditioner is level or
tilting slightly to the outside.
2
Extend the guide panels to fill the window
opening using 4 Type B screws to secure
them.
3
Cut the foam strip to the window width. Stuff
the foam strip between the glass and the
window to prevent air and insects from
getting into the room. Fasten the L bracket
using a Type A screw.
CAUTION
●
During the following step, hold unit firmly until
window sash is lowered to top channel behind
side panel frames. Personal injury or property
damage may result if unit falls from window.
CAUTION
●
To prevent broken glass or damage to windows,
on vinyl or other similarly constructed windows,
attach the window locking beacket to the
window side jamb with one Type A screw.
Window Frame
Upper Guide
L Bracket
Bottom Guide
Seal
About
ΒΌ"
L Bracket
Screws
(Type B)
Screw
(Type A)
Foam Strip
4
Install the L bracket behind the inner
window sill, with short side of bracket
as shown. Use the 2 Type A screws
provided.
The bracket helps to hold unit securely in
place. Be sure to place bracket edge flush
against back of inner sill.
NOTE
●
L Bracket
Outer Sill
Inner Sill
Center Line
3
Open the window and mark center line
on the center of the inner sill.
Room Side
Inner Sill
Center Line