LG LWD3081ST Owner's Manual (English) - Page 35

Removing & Replacing The Lift-off Oven Door, Door Care Instructions

Page 35 highlights

ENGLISH REMOVING & REPLACING THE LIFT-OFF OVEN DOOR CAUTION • Be careful when removing and lifting the door. • DO NOT lift the door by the handle. - The door is very heavy. To remove the door: Step. 1 Open the door fully. Slot Step. 2 Pull the hinge locks down toward the door frame to the unlocked position. Hinge lock Lock Unlock Step. 3 Firmly grasp both sides of the door at the top. Step. 4 Close door to the door removal position, which is approximately 5 degrees. about 5° Step. 5 Lift door up and out until the hinge arm is clear of the slot. To replace the door: Step. 1 Firmly grasp both sides of the door at the top. Step. 2 With the door at the same angle as the removal position, seat the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully seated into the bottom of the slot. Hinge arm Bottom edge of slot Indentation Step. 3 Open the door fully. If the door will not open fully, the indentation is not seated correctly in the bottom edge of the slot. Step. 4 Push the hinge locks up against the front frame of the oven cavity to the locked position. Hinge arm Hinge lock Step. 5 Close the oven door. DOOR CARE INSTRUCTIONS • Most oven doors contain glass that can break. Read the following recommendations: 1. Do not close the oven door until all the oven racks are fully in place. 2. Do not hit the glass with pots, pans, or any other object. 3. Scratching, hitting, jarring, or stressing the glass may weaken its structure causing an increased risk of breakage at a later time. 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

35
ENGLISH
To remove the door:
Step. 1
Open the door fully.
Step. 2
Pull the hinge locks
down toward the door
frame to the unlocked
position.
Step. 3
Firmly grasp both sides of the door at the top.
Step. 4
Close door to the door removal
position, which is
approximately 5 degrees.
Step. 5
Lift door up and out until the hinge arm is clear of
the slot.
To replace the door:
Step. 1
Firmly grasp both sides of the door at the top.
Step. 2
With the door at
the same angle as
the removal
position, seat the
indentation of the
hinge arm into the
bottom edge of the
hinge slot. The
notch in the hinge
arm must be fully
seated into the
bottom of the slot.
Step. 3
Open the door fully. If the door will not open fully,
the indentation is not seated correctly in the bottom
edge of the slot.
Step. 4
Push the hinge locks up
against the front frame of the
oven cavity to the locked
position.
Step. 5
Close the oven door.
REMOVING & REPLACING THE LIFT-OFF OVEN DOOR
DOOR CARE INSTRUCTIONS
• Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven
racks are fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring, or stressing the glass
may weaken its structure causing an increased
risk of breakage at a later time.
• Be careful when removing and lifting the door.
• DO NOT lift the door by the handle.
- The door is very heavy.
CAUTION
Slot
Hinge
lock
Lock
Unlock
about 5°
Hinge arm
Indentation
Bottom
edge of
slot
Hinge arm
Hinge lock