LG M2762D-PM Owner's Manual - Page 87

APPENDIX PROGRAMMING THE REMOTE CONTROL The remote is a multi-brand or universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding mode button (such as a D V D or V C R) on the remote control. While pointing at the component, test the POWER and CH + / - buttons to see if the component responds properly. If not, the remote requires programming to operate the device. 2 Turn on the component to be programmed, then press the corresponding mode button (such as a D V D or V C R) on the remote control. The remote control button of desired device is lighted. 3 Press the MENU and MUTE buttons simultaneously. Now the remote control is ready to be programmed with the new code. 4 Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off. 5 Press the MENU button to store the code. 6 Test the remote control functions to see if the component responds properly. If not, repeat from step 2. PROGRAMMING CODE DVD Brand Codes APEX DIGITAL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNAVOX 013 MARANTZ 024 Brand MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN Codes 002 023 008 017 003 009 013 004 026 021 005 006 Brand RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH Codes 005 006 011 015 007 005 006 019 008 009 018 010 016 025 85