LG M5203R Service Manual - Page 15

3. INSTALL THE AIR CONDITIONER IN THE WINDOW a. Carefully lift the air conditioner and slide it into the open window. Make sure the bottom guide of the air conditioner drops into the notches of the L bracket. See Figure. 27. IMPORTANT : When the air conditioner drops into the L bracket, the air conditioner will be centered in window opening as shown in Figure. 28. b. While steadying the air conditioner, carefully bring the window sash down behind the upper guide of the air conditioner, as shown in Figure. 29. 4. SECURE THE GUIDE PANELS Extend the guide panels (TYPE F) to fill the window opening using 4 screws (TYPE B) to secure them, as shown in Figure. 30. 5. INSTALL THE SASH SEAL AND SASH LOCK a. Cut the sash seal (TYPE E) to the window width. Stuff the sash seal between the glass and the window to prevent air and insects from getting into the room, as shown in Figure. 30. b. Fasten the L bracket using a (TYPE A) screw, as shown in Figure. 30. 6. Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching power cord to electrical outlet. 3.2.4 How to Secure the Drain pipe In humid weather, excess water may cause the BASE PAN to overflow. To drain the water, remove the DRAIN CAP and secure the DRAIN PIPE to the rear hole of the BASE PAN. (Figure. 31) INNER SILL OUTER SILL TYPE A INSIDE CENTER LINE 8" SHORT SIDE 8" OUTSIDE Figure 27 L BRACKET Figure 28 CENTER LINE WINDOW FRAME UPPER GUIDE SEAL BOTTOM GUIDE ABOUT 1/4" Figure 29 L BRACKET L BRACKET TYPE A TYPE B SASH SEAL (TYPE E) Figure 30 hang push Figure 31 DRAIN CAP DRAIN PIPE -15-