LG M5203R Service Manual - Page 4

1.5 LOCATIONS OF CONTROLS 1.5.1 CONTROLS Dry Fan Cool TEMPERATURE SETTING • This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F(16°C) to 86°F(30°C) by 1°F(1°C). Select the lower number for lower temperature of the room. ENERGY SAVER The fan stops when the compressor stops cooling. • Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed. FAN/COOL/DRY • Everytime you push this button, it will toggle between COOL, FAN and DRY. ON/OFF TIMER - STOPPING OPERATION • Everytime you push this button, when the unit is operating, timer is set as follows. (1Hour 2Hours 3Hours 4Hours 5Hours 6Hours 7Hours 8Hours 9Hours 10Hours 11Hours 12Hours Cancel) • The Setting Temperature will be raised by 2°F(1°C) 30min. later and by 2°F(1°C) after another 30 min. - STARTING OPERATION • Everytime you push this button, when the unit is not operating, timer is set as follow. (1Hour 2Hours 3Hours 4Hours 5Hours 6Hours 7Hours 8Hours 9Hours 10Hours 11Hours 12Hours Cancel) POWER • To turn the unit ON, push the button. To turn the unit OFF, push the button again. • This button takes priority over any other buttons. • When you first turn it on, the unit is on the High cool mode and the temp. at 72°F(22°C). FAN SPEED • Everytime you push this button it is set as follows. {High(F2) Low(F1) High(F2)...}. -4-